We deals in Hummer's Turbine which patented Permanent Magnetic Generator 'in-the-hub' technology is zero maintenance and low heat emission.
The turbine incorporates direct drive technology which makes it
light-weight, low maintenance and achieves high power yields. Auto
control protection from over charging, over discharging, short circuit
and over heating allow for total confidence in investment. No cable
un0twisting. Slip ring yaw shaft. Hummer turbines have a minimum 25-30
year projected life expectancy.
|
TURBINE SPECIFICATIONS |
|
|
Rated Output: |
500 Watt |
|
Maximum Output: |
1000 Watt |
|
Charge Voltage: |
DC 24V |
|
Output Voltage: |
110V to 240V |
|
Number of Blades: |
3 |
|
Blade Material: |
Glass Fiber Reinforced Plastic |
|
Blade Diameter: |
2.7m (8.9 ft.) |
|
Start-up Wind Speed: |
2.5m/s (5.7 mph) |
|
Rated Wind Speed |
7m/s (15.7 mph) |
|
Turbine Weight (above Tower) |
45kg / 99 lbs. |
| RPM: | 600 |
| Noise: | 29 db (A) @ 5m/s |
| Standard Warranty: | 2 Years |
| Extended Warranty: | 3 Years |
| Application: | Off Grid Only |
|
Average Wind Speed (m/s) |
3 |
4 |
5 |
6 |
7 |
8 | 9 |
10 |
|
Average Wind Speed (mph) |
7 | 9 | 11 | 13 | 16 | 18 | 20 | 22 |
|
Average Power Output (kWh) |
131 | 279 | 1804 | 3444 | 4510 | 5274 | 6231 | 6924 |
|
|||||||||||||||||
Rotor Blade:
Designed
according to airfoil structure. They are made of glass fiber
reinforced plastic to increase the wind power utilization ratio. The
end joint tech ensures the low wind start, and stable quiet running.
It measures wind speed, if the wind speed is over 3m/s continuously
with 30s, wind direction automatic tracking system will be activated
to make the blades face wind correctly, while the wind speed is less
than 3m/s, the system will keep in standby mode.
Generator:
Extreme
light and small, low in sound, quick in startup, quick in heat
defusing, running, and generating, high in efficiency (>0.8).
Yaw Shaft:
M
ade
of reinforced aluminum alloy, light and strong. It receives wind
signal, and indicates wind direction. It will read the average angle
value of dogvane over 120s, if the angle degree between dogvane and
wind generator axis is more than 10?, the DC24 motor will drive yaw
shaft to seek wind automatically.
Noise Cone:
Made
of rein
forced aluminum alloy, antisepsis casting.
Tail Pole & Tail Wing:
Made
of stainless steel, anti-high wind, swift and strong.
Tower:
Made
of carbon steel, salt and acid proof, as well as UV-proof. hummer
hydraulic system is classified as electric made and manual mode. The
manual mode is basically used for 3kw and below models, while the
electric mode is mainly for 5kw and above models.
Inverter:
Integrated
of charging & discharging, inverting & unloading; compact input of
wind and solar power. Using intelligent CPU control technology, the
control circuit is simple, reliable and rapid in responding to the
external environment. Using SPWM/PWM technology, out puts stable
frequency, stable voltage, filters out noise, low distortion pure
sine wave. High converting efficiency with the usage of amorphous
transformed and high frequency breaker, and strong and more
compatible output for loads. Designed with protection function
against overload, over voltage, over current, and over temperature.
The CPU will turn off the inverter automatically when there is no
load for along time to protect the battery.
Charge Controlling:
By
using most advanced charging module, the energy loss drops to the
minimum extent. Its CPU center will continuously check the battery
status. If overcharged, it will order wind turbine to stop charging
and transfer to standby mode at the meantime, for protection of
battery very properly at the maritime.
Main Technical Data: H6. 4-5000
|
Rated power (W) |
5000 | Generator output | Single-phase frequency conversion AC |
|
Maximum output power (W) |
7500 | Output AC frequency (Hz) |
0~360 |
|
Charging voltage (V) |
DC 240 | Rated charging current (A) | 20.8 |
| Blade Quantity | 3 | The maximum charging current (is a short time) (A) | 32 |
| Blade Material | GRP | Generator efficiency | >0.8 |
| Blade diameter (m) | 6.4 | Wireless tower | 495x185x12000(2pcs) |
| Start-up wind speed (m/s) | 2.5 | Guy Tower | 220x3000x6(4pcs) |
| Rated wind speed (m/s) | 10.0 | Tower height (m) | 12 |
| Rated rotating rater (r/min) | 240 | Weight of generator (kg) | 147 |
| Wind energy utilizing ratill (Cp) | 0.4 | Suggested battery | 400/600Ah |
Rated power (W)
Maximum output power (W)
0~400
Charging voltage (V)
Main Technical Data:
H3. 1-1000
1000
Generator output
Single-phase frequency
conversion AC
2000
Output AC frequency (Hz)
DC 60
Rated charging current (A)
16.7
Blade Quantity
3
The maximum charging
current (is a short time) (A)
30
Blade Material
GRP
Generator efficiency
>0.8
Blade diameter (m)
3.1
Wireless tower
450x260x4000(2pcs)
Start-up wind speed (m/s)
2.6
Guy Tower
89x2000x3.5(4pcs)
Rated wind speed (m/s)
9.0
Tower height (m)
8
Rated rotating rater
(r/min)
500
Weight of generator (kg)
15
Wind energy utilizing
ratill (Cp)
0.45
Suggested battery
150/200Ah
REAP Expo
Islamabad Exhibition.
Karachi Expo
Alternative Energy Solution
Foreign Delegation
Visit Shaheen Enterprise
(+9221) 346 823 87
(+92) 300 927 1169
Shaheen Enterprise (Pvt.) Ltd.
CM/4, Shamsi Society,
Wireless Gate, Malir Halt,
Karachi, Pakistan.